#include "initfunctions.h"

//------------------------------------------------
//-------------- SD-Card Functions ---------------
void initSDCard()
{
  if (!SD.begin())
  {
    Serial.println("Card Mount Failed");
    return;
  }
  uint8_t cardType = SD.cardType();

  if (cardType == CARD_NONE)
  {
    Serial.println("No SD card attached");
    return;
  }
  Serial.print("SD Card Type: ");
  if (cardType == CARD_MMC)
  {
    Serial.println("MMC");
  }
  else if (cardType == CARD_SD)
  {
    Serial.println("SDSC");
  }
  else if (cardType == CARD_SDHC)
  {
    Serial.println("SDHC");
  }
  else
  {
    Serial.println("UNKNOWN");
  }
  uint64_t cardSize = SD.cardSize() / (1024 * 1024);
  Serial.printf("SD Card Size: %lluMB\n", cardSize);
}

//------------------------------------------------
//--------------- IR Functions -------------------
/* void initIR()
{
  IrSender.begin(IR_SEND_PIN, ENABLE_LED_FEEDBACK, USE_DEFAULT_FEEDBACK_LED_PIN); // Specify send pin and enable feedback LED at default feedback LED pin
  Serial.println();
  Serial.print(F("Send IR signals at pin "));
  Serial.println(IR_SEND_PIN);
} */

//------------------------------------------------
//------------- Webserver Functions --------------
void initWiFi()
{
  WiFi.mode(WIFI_STA);
  WiFi.begin(SSID, PASSWORD);
  Serial.print("Connecting to WiFi ..");
  while (WiFi.status() != WL_CONNECTED)
  {
    Serial.print('.');
    delay(1000);
  }
  Serial.println(WiFi.localIP());
}