diff --git a/minidisc_namer_RM-D27M.ino b/minidisc_namer_RM-D27M.ino
index 3063f50..1159503 100644
--- a/minidisc_namer_RM-D27M.ino
+++ b/minidisc_namer_RM-D27M.ino
@@ -1,866 +1,139 @@
-// modified for use with Sony RM-D27M
-// based on https://hackaday.io/project/165504-sony-minidisc-namer by smartroad
+/*
+ WiFi Web Server LED Blink
 
-#include <IRremote.h> // Muss installiert werden. Funktioniert mit v2.5.0 Siehe https://github.com/Arduino-IRremote/Arduino-IRremote
-#include "defines.h"
+ A simple web server that lets you blink an LED via the web.
+ This sketch will print the IP address of your WiFi Shield (once connected)
+ to the Serial monitor. From there, you can open that address in a web browser
+ to turn on and off the LED on pin 5.
 
-IRsend irsend;
+ If the IP address of your shield is yourAddress:
+ http://yourAddress/H turns the LED on
+ http://yourAddress/L turns it off
 
-char inputChars[64];
-byte charCount = 0;
+ This example is written for a network using WPA2 encryption. For insecure
+ WEP or WPA, change the Wifi.begin() call and use Wifi.setMinSecurity() accordingly.
 
-byte mode = 0; // Capitals = 0, Lowercase = 1
-byte targetMode = 0;
-boolean commandMode = true; // True = control playback | False = name entry mode
+ Circuit:
+ * LED attached to pin 13
+ * IR Transmitter attached to pin 4
 
-int totalCount = 0;
-byte blockCount = 0;
+ created for arduino 25 Nov 2012
+ by Tom Igoe
 
-// define the IT sendPin:
-uint8_t tSendPin = 4; // IO4 auf AZ D1
+ported for sparkfun esp32 
+31.01.2017 by Jan Hendrik Berlin
+ 
+ */
 
-/* start testing code for hardware button*/
-// constants won't change. They're used here to set pin numbers:
-uint8_t buttonPin = 14; // the number of the pushbutton pin
-uint8_t ledPin = 2;     // the number of the LED pin
+#include <WiFi.h>
+#include <IRremote.hpp>
 
-// variables will change:
-uint8_t buttonState = 0; // variable for reading the pushbutton status
-/* end testing code */
+const char* ssid     = "FritzBox-7590-NB";
+const char* password = "60762265561727730801";
+
+WiFiServer server(80);
 
 void setup()
 {
-  pinMode(2, OUTPUT);
-  // Initialize serial monitor:
-  Serial.begin(115200);
-  while (!Serial)
-    ;
-  // helpText();
-  pinMode(tSendPin, OUTPUT);
-  digitalWrite(tSendPin, LOW);
-  /* start testing code */
-  // initialize the LED pin as an output:
-  pinMode(ledPin, OUTPUT);
-  // initialize the pushbutton pin as an input:
-  pinMode(buttonPin, INPUT);
-  digitalWrite(ledPin, HIGH);
-  /* end testing code */
+    Serial.begin(115200);
+    pinMode(13, OUTPUT);      // set the LED pin mode
+
+    delay(10);
+
+    // We start by connecting to a WiFi network
+
+    Serial.println();
+    Serial.println();
+    Serial.print("Connecting to ");
+    Serial.println(ssid);
+
+    WiFi.begin(ssid, password);
+
+    while (WiFi.status() != WL_CONNECTED) {
+        delay(500);
+        Serial.print(".");
+    }
+
+    // Here the macro IR_SEND_PIN is not defined or undefined above with #undef IR_SEND_PIN
+    uint8_t tSendPin = 4;
+    IrSender.begin(tSendPin, ENABLE_LED_FEEDBACK, USE_DEFAULT_FEEDBACK_LED_PIN); // Specify send pin and enable feedback LED at default feedback LED pin
+    // You can change send pin later with IrSender.setSendPin();
+    Serial.println();
+    Serial.print(F("Send IR signals at pin "));
+    Serial.println(tSendPin);
+
+    Serial.println();
+    Serial.println("WiFi connected.");
+    Serial.println("IP address: ");
+    Serial.println(WiFi.localIP());
+    
+    server.begin();
+
 }
 
-void loop()
-{
-  // blink(); //! Der Loop wird gerade nur einmal ausgeführt und stoppt bei der serial monitor eingabe. Bei jeder Eingabe erfolgt ein neue Loop. Alle test-Funktionen laufen durch.
-  // simpleButtonTest();
-  buttonPlayTest();
 
-  // oldSerialInput();
-}
 
-void simpleButtonTest()
-{
-  /* start testing code */
-  // read the state of the pushbutton value:
-  buttonState = digitalRead(buttonPin);
+void loop(){
+ WiFiClient client = server.available();   // listen for incoming clients
 
-  // check if the pushbutton is pressed. If it is, the buttonState is HIGH:
-  if (buttonState == HIGH)
-  {
-    // write to serial monitor:
-    Serial.println(F("button state is HIGH"));
-    // turn LED on:
-    digitalWrite(ledPin, HIGH);
-  }
-  else
-  {
-    // turn LED off:
-    digitalWrite(ledPin, LOW);
-  }
-  /* end testing code */
-}
+  if (client) {                             // if you get a client,
+    Serial.println("New Client.");           // print a message out the serial port
+    String currentLine = "";                // make a String to hold incoming data from the client
+    while (client.connected()) {            // loop while the client's connected
+      if (client.available()) {             // if there's bytes to read from the client,
+        char c = client.read();             // read a byte, then
+        Serial.write(c);                    // print it out the serial monitor
+        if (c == '\n') {                    // if the byte is a newline character
 
-void buttonPlayTest()
-{
-  /* start testing code */
-  // read the state of the pushbutton value:
-  buttonState = digitalRead(buttonPin);
+          // if the current line is blank, you got two newline characters in a row.
+          // that's the end of the client HTTP request, so send a response:
+          if (currentLine.length() == 0) {
+            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
+            // and a content-type so the client knows what's coming, then a blank line:
+            client.println("HTTP/1.1 200 OK");
+            client.println("Content-type:text/html");
+            client.println();
 
-  // check if the pushbutton is pressed. If it is, the buttonState is HIGH:
-  if (buttonState == HIGH)
-  {
-    // write to serial monitor:
-    Serial.println(F("button state is HIGH"));
-    // turn LED on:
-    digitalWrite(ledPin, HIGH);
-    Serial.println(F("Play"));
-    sendButton(PLAY);
-  }
-  else
-  {
-    // turn LED off:
-    digitalWrite(ledPin, LOW);
-  }
-  /* end testing code */
-}
+            // the content of the HTTP response follows the header:
+            client.print("Click <a href=\"/H\">here</a> to turn the LED on pin 13 on.<br>");
+            client.print("Click <a href=\"/L\">here</a> to turn the LED on pin 13 off.<br>");
+            client.print("<a href=\"/play\">play</a><br>");
+            client.print("<form action=\"/api/control-deck\" method=\"post\"><button name=\"control\" type=\"submit\" value=\"play\">play</button></form><br>");
+            client.print("<form action=\"/api/control-deck\" method=\"get\"><input name=\"textinput\" type=\"text\" /></form><br>");
 
-void oldSerialInput()
-{
+            // The HTTP response ends with another blank line:
+            client.println();
+            // break out of the while loop:
+            break;
+          } else {    // if you got a newline, then clear currentLine:
+            currentLine = "";
+          }
+        } else if (c != '\r') {  // if you got anything else but a carriage return character,
+          currentLine += c;      // add it to the end of the currentLine
+        }
 
-  if (commandMode)
-  {
-    if (charCount > 0)
-    {
-      Serial.println(F("\n\r\u001b[34;1mCONFIRM NAME INPUT\u001b[0m"));
-      Serial.println(F("Y - Yes or N - NO"));
-    }
-    else
-    {
-      Serial.print(F("\n\r\n\rEnter Command (H for help): "));
-    }
-  }
-
-  while (!Serial.available())
-  {
-  }
-
-  if (commandMode)
-  {
-
-    char serialChar = Serial.read();
-    if (charCount == 0)
-    {
-      if (serialChar == 'b')
-      {
-        Serial.println(F("Next Track"));
-        sendButton(AMSNEXT);
-      }
-      else if (serialChar == 'z')
-      {
-        Serial.println(F("Previous Track"));
-        sendButton(AMSPREV);
-      }
-      else if (serialChar == 'x')
-      {
-        Serial.println(F("Play"));
-        sendButton(PLAY);
-      }
-      else if (serialChar == 'c')
-      {
-        Serial.println(F("Pause"));
-        sendButton(PAUSE);
-      }
-      else if (serialChar == 'v')
-      {
-        Serial.println(F("Stop"));
-        sendButton(STOP);
-      }
-      else if (serialChar == 'l')
-      {
-        Serial.println(F("Eject"));
-        sendButton(EJECT);
-      }
-      else if (serialChar == 's')
-      {
-        Serial.println(F("Starting Record"));
-        sendButton(RECORD);
-      }
-      else if (serialChar == 'S')
-      {
-        Serial.println(F("Music Sync Recording"));
-        sendButton(MUSICSYNC);
-      }
-      else if (serialChar == 'd')
-      {
-        Serial.println(F("Display Mode"));
-        sendButton(DISPLAY);
-      }
-      else if (serialChar == 'D')
-      {
-        Serial.println(F("Scrolling Display"));
-        sendButton(SCROLL);
-      }
-      else if (serialChar == 'r')
-      {
-        Serial.println(F("Repeat Mode"));
-        sendButton(REPEATMODE);
-      }
-      else if (serialChar == 'R')
-      {
-        Serial.println(F("Section Repeat (A<>B)"));
-        sendButton(ATOB);
-      }
-      else if (serialChar == '1')
-      {
-        Serial.print(F("1"));
-        // sendButton(NUMBER1);
-        digitalWrite(ledPin, HIGH);
-        Serial.print(F("set ledPin HIGH"));
-      }
-      else if (serialChar == '2')
-      {
-        Serial.print(F("2"));
-        // sendButton(NUMBER2);
-        digitalWrite(ledPin, LOW);
-        Serial.print(F("set ledPin LOW"));
-      }
-      else if (serialChar == '3')
-      {
-        Serial.print(F("3"));
-        sendButton(NUMBER3);
-      }
-      else if (serialChar == '4')
-      {
-        Serial.print(F("4"));
-        sendButton(NUMBER4);
-      }
-      else if (serialChar == '5')
-      {
-        Serial.print(F("5"));
-        sendButton(NUMBER5);
-      }
-      else if (serialChar == '6')
-      {
-        Serial.print(F("6"));
-        sendButton(NUMBER6);
-      }
-      else if (serialChar == '7')
-      {
-        Serial.print(F("7"));
-        sendButton(NUMBER7);
-      }
-      else if (serialChar == '8')
-      {
-        Serial.print(F("8"));
-        sendButton(NUMBER8);
-      }
-      else if (serialChar == '9')
-      {
-        Serial.print(F("9"));
-        sendButton(NUMBER9);
-      }
-      else if (serialChar == '0')
-      {
-        Serial.print(F("0"));
-        sendButton(NUMBER10);
-      }
-      else if (serialChar == '=' || serialChar == '+')
-      {
-        Serial.print(F(">10"));
-        sendButton(LARGER25);
-      }
-      else if (serialChar == '#')
-      {
-        Serial.print(F("CLEARING MEMUSAGE"));
-        totalCount = 0;
-        blockCount = 0;
-        memUsed();
-      }
-      else if (serialChar == '`')
-      { // change to naming mode
-        Serial.println(F("Name Mode"));
-        commandMode = false;
-        memUsed();
-        Serial.println(F("\n\rType name and press enter to send:\u001b[37;1m"));
-      }
-      else if (serialChar == 'H' || serialChar == 'h')
-      { // stop
-        Serial.println(F("Help\r\n\r\n"));
-        helpText();
+        // Check to see if the client request was "GET /H" or "GET /L":
+        if (currentLine.endsWith("GET /H")) {
+          digitalWrite(13, HIGH);               // GET /H turns the LED on
+        }
+        if (currentLine.endsWith("GET /L")) {
+          digitalWrite(13, LOW);                // GET /L turns the LED off
+        }
+        if (currentLine.endsWith("GET /play")) {
+          Serial.println("MD play");
+          Serial.flush();
+          IrSender.sendSony(0xF, 0x2A, 2, 12);
+        }
+        if (currentLine.endsWith("POST /api/control-deck")) {
+          
+          Serial.println("POST");
+          char c = client.read();
+          Serial.print(c);
+        }
       }
     }
-    else
-    {
-      if (serialChar == 'Y' || serialChar == 'y')
-      { // confirm name
-        totalCount += charCount;
-        blockCount += (charCount + 6) / 7;
-        memUsed();
-        charCount = 0;
-        sendButton(NAME);
-      }
-      else if (serialChar == 'N' || serialChar == 'n')
-      { // cancel name
-        memUsed();
-        charCount = 0;
-        sendButton(STOP);
-      }
-    }
-  }
-  else
-  {
-    inputChars[charCount] = Serial.read();
-    if (inputChars[charCount] == 10 || inputChars[charCount] == 13)
-    {
-      Serial.print(F("\u001b[0m"));
-      if (nameCheck())
-        sendName();
-      else
-        charCount = 0;
-      commandMode = true;
-    }
-    else if (inputChars[charCount] == 127)
-    {
-      Serial.print(inputChars[charCount]);
-      charCount--;
-    }
-    else
-    {
-      Serial.print(inputChars[charCount]);
-      charCount++;
-    }
+    // close the connection:
+    client.stop();
+    Serial.println("Client Disconnected.");
   }
 }
-
-void memUsed()
-{
-  float countPercent = (float(totalCount) / 1785) * 100;
-  float blockPercent = (float(blockCount) / 255) * 100;
-  Serial.print(F("\n\rTotal characters used: \u001b[1m"));
-  if (countPercent >= 75 && countPercent < 90)
-    Serial.print(F("\u001b[33m"));
-  else if (countPercent >= 90)
-    Serial.print(F("\u001b[31m"));
-  else
-    Serial.print(F("\u001b[32m"));
-  Serial.print(countPercent);
-  Serial.print(F("%\u001b[0m\u001b[0m\n\rTotal blocks used: \u001b[1m"));
-  if (blockPercent >= 75 && blockPercent < 90)
-    Serial.print(F("\u001b[33m"));
-  else if (blockPercent >= 90)
-    Serial.print(F("\u001b[31m"));
-  else
-    Serial.print(F("\u001b[32m"));
-  Serial.print(blockPercent);
-  Serial.print(F("%\u001b[0m\n\r"));
-}
-
-void sendName()
-{
-  Serial.println(F("\n\r\n\rActivating Name Edit on Player - \u001b[31mPress any key when player ready\u001b[0m"));
-  sendButton(NAME);
-  mode = 0;
-  targetMode = 0;
-  // delay(2000);
-  while (!Serial.available())
-  {
-  }
-
-  char purge = Serial.read(); // dump the character
-
-  Serial.print(F("\n\rSending: \u001b[32;1m"));
-
-  for (byte c = 0; c < charCount; c++)
-  {
-    if (inputChars[c] >= 65 && inputChars[c] <= 90)
-    { // Check if char is capital and switch to correct mode
-      targetMode = 0;
-    }
-    else if (inputChars[c] >= 97 && inputChars[c] <= 122)
-    { // Check if char is lower and switch to correct mode
-      targetMode = 1;
-    }
-
-    while (mode != targetMode)
-    {
-      sendButton(CHAR);
-      delay(1000);
-      mode++;
-      if (mode > 1)
-        mode = 0;
-    }
-
-    if (inputChars[c] == 'A')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(CONTINUE, 1);
-    }
-    else if (inputChars[c] == 'B')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(SHUFFLE, 1);
-    }
-    else if (inputChars[c] == 'C')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(PROGRAM, 1);
-    }
-    else if (inputChars[c] == 'D')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(KEY_D, 1);
-    }
-    else if (inputChars[c] == 'E')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(KEY_E, 1);
-    }
-    else if (inputChars[c] == 'F')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER1, 1);
-    }
-    else if (inputChars[c] == 'G')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER2, 1);
-    }
-    else if (inputChars[c] == 'H')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER3, 1);
-    }
-    else if (inputChars[c] == 'I')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER4, 1);
-    }
-    else if (inputChars[c] == 'J')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER5, 1);
-    }
-    else if (inputChars[c] == 'K')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER6, 1);
-    }
-    else if (inputChars[c] == 'L')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER7, 1);
-    }
-    else if (inputChars[c] == 'M')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER8, 1);
-    }
-    else if (inputChars[c] == 'N')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER9, 1);
-    }
-    else if (inputChars[c] == 'O')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER10, 1);
-    }
-    else if (inputChars[c] == 'P')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER11, 1);
-    }
-    else if (inputChars[c] == 'Q')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER12, 1);
-    }
-    else if (inputChars[c] == 'R')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER13, 1);
-    }
-    else if (inputChars[c] == 'S')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER14, 1);
-    }
-    else if (inputChars[c] == 'T')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER15, 1);
-    }
-    else if (inputChars[c] == 'U')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER16, 1);
-    }
-    else if (inputChars[c] == 'V')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER17, 1);
-    }
-    else if (inputChars[c] == 'W')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER18, 1);
-    }
-    else if (inputChars[c] == 'X')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER19, 1);
-    }
-    else if (inputChars[c] == 'Y')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER20, 1);
-    }
-    else if (inputChars[c] == 'Z')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER21, 1);
-    }
-
-    else if (inputChars[c] == 'a')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(CONTINUE, 1);
-    }
-    else if (inputChars[c] == 'b')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(SHUFFLE, 1);
-    }
-    else if (inputChars[c] == 'c')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(PROGRAM, 1);
-    }
-    else if (inputChars[c] == 'd')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(KEY_D, 1);
-    }
-    else if (inputChars[c] == 'e')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(KEY_E, 1);
-    }
-    else if (inputChars[c] == 'f')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER1, 1);
-    }
-    else if (inputChars[c] == 'g')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER2, 1);
-    }
-    else if (inputChars[c] == 'h')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER3, 1);
-    }
-    else if (inputChars[c] == 'i')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER4, 1);
-    }
-    else if (inputChars[c] == 'j')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER5, 1);
-    }
-    else if (inputChars[c] == 'k')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER6, 1);
-    }
-    else if (inputChars[c] == 'l')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER7, 1);
-    }
-    else if (inputChars[c] == 'm')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER8, 1);
-    }
-    else if (inputChars[c] == 'n')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER9, 1);
-    }
-    else if (inputChars[c] == 'o')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER10, 1);
-    }
-    else if (inputChars[c] == 'p')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER11, 1);
-    }
-    else if (inputChars[c] == 'q')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER12, 1);
-    }
-    else if (inputChars[c] == 'r')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER13, 1);
-    }
-    else if (inputChars[c] == 's')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER14, 1);
-    }
-    else if (inputChars[c] == 't')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER15, 1);
-    }
-    else if (inputChars[c] == 'u')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER16, 1);
-    }
-    else if (inputChars[c] == 'v')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER17, 1);
-    }
-    else if (inputChars[c] == 'w')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER18, 1);
-    }
-    else if (inputChars[c] == 'x')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER19, 1);
-    }
-    else if (inputChars[c] == 'y')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER20, 1);
-    }
-    else if (inputChars[c] == 'z')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER21, 1);
-    }
-
-    else if (inputChars[c] == 39 || inputChars[c] == 96)
-    { // ' and `
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER25, 1);
-    }
-    else if (inputChars[c] == 45 || inputChars[c] == 95)
-    { // - or _
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER22, 1);
-    }
-    else if (inputChars[c] == 47 || inputChars[c] == 92)
-    { // slash or backslash
-      Serial.print(inputChars[c]);
-      sendCmd(LARGER25, 1);
-    }
-    else if (inputChars[c] == 44)
-    { // , not supported
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER1, 1);
-    }
-    else if (inputChars[c] == '.')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER24, 1);
-    }
-    else if (inputChars[c] == '(')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(ASPACE, 1);
-    }
-    else if (inputChars[c] == ')')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(MSCAN, 1);
-    }
-    else if (inputChars[c] == ':')
-    { // : not supported
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER1, 8);
-    }
-    else if (inputChars[c] == '!')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(ATOB, 1);
-    }
-    else if (inputChars[c] == '?')
-    {
-      Serial.print(inputChars[c]);
-      sendCmd(REPEATMODE, 1);
-    }
-
-    else if (inputChars[c] == '1')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER1, 1);
-    }
-    else if (inputChars[c] == '2')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER2, 1);
-    }
-    else if (inputChars[c] == '3')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER3, 1);
-    }
-    else if (inputChars[c] == '4')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER4, 1);
-    }
-    else if (inputChars[c] == '5')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER5, 1);
-    }
-    else if (inputChars[c] == '6')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER6, 1);
-    }
-    else if (inputChars[c] == '7')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER7, 1);
-    }
-    else if (inputChars[c] == '8')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER8, 1);
-    }
-    else if (inputChars[c] == '9')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER9, 1);
-    }
-    else if (inputChars[c] == '0')
-    {
-      Serial.print(inputChars[c]);
-      sendNumCmd(NUMBER10, 1);
-    }
-
-    else if (inputChars[c] == ' ')
-    { // space
-      Serial.print(inputChars[c]);
-      sendCmd(NUMBER23, 1);
-    }
-  }
-
-  Serial.print(F("\u001b[0m\n\r\n\rTotal characters needed: "));
-  Serial.print(charCount);
-  Serial.print(F("\n\rTotal blocks needed: "));
-  Serial.print((charCount + 6) / 7);
-  Serial.print(F("\n\r"));
-}
-
-void sendCmd(int command, byte repeats)
-{
-  for (int i = 0; i <= repeats - 1; i++)
-  {
-    sendButton(command);
-    delay(100);
-  }
-}
-
-void sendButton(int bts)
-{
-  digitalWrite(tSendPin, HIGH);
-  for (int i = 0; i < 3; i++)
-  {
-    irsend.sendSony(bts, 12); //! Hier wird das Command gesendet! Es besteht aus dem command und der bitlänge.
-    delay(25);
-  }
-  digitalWrite(tSendPin, LOW);
-}
-
-void sendNumCmd(int command, byte repeats)
-{
-  for (int i = 0; i <= repeats - 1; i++)
-  {
-    sendButton(NUM);
-    delay(1000);
-    sendButton(command);
-    delay(100);
-    sendButton(NUM);
-    delay(1000);
-  }
-}
-
-void helpText()
-{
-  Serial.print(F("\u001b[1m\u001b[7mMinidisc Namer\u001b[0m\n\r\
-\n\r\
-\u001b[1mCommands:\u001b[0m\n\r\
-\n\r\
-\u001b[32mGeneral:\n\r\
-\u001b[0mz    Previous Track\n\r\
-x    Play\n\r\
-c    Pause\n\r\
-v    Stop\n\r\
-b    Next Track\n\r\
-l    Eject\n\r\
-\n\r\
-\u001b[31mRecording:\n\r\
-\u001b[0ms    Record\n\r\
-S    Music Sync Recording\n\r\
-i    Input Selection\n\r\
-q    Recording Mode\n\r\
-\n\r\
-\u001b[33mNumbers:\n\r\
-\u001b[0m0-9  Number Entry\n\r\
-=/+  >10 Entry\n\r\
-\n\r\
-\u001b[34;1mDisplay:\n\r\
-\u001b[0md    Display\n\r\
-D    Scroll Display\n\r\
-\n\r\
-\u001b[36mPlaymodes/Repeating:\n\r\
-\u001b[0mp    Play Mode (Normal/Shuffle/Program)\n\r\
-r    Repeat\n\r\
-R    A <-> B\n\r\
-\n\r\
-\u001b[32;1mNaming Disc/Tracks:\n\r\
-\u001b[0m`    Name Entry Mode\n\r\
-#    Reset Memory Usage Stats\n\r\
-\n\r\
-\u001b[37;1mh    This help list\u001b[0m\n\r\n\r"));
-}
-
-boolean nameCheck()
-{
-  Serial.print(F("\n\r\n\r\n\rSend this to player (Y/N):\n\r\u001b[37;1m"));
-  for (byte c = 0; c < charCount; c++)
-  {
-    Serial.print(inputChars[c]);
-  }
-  Serial.print(F("\n\r\u001b[0m"));
-  while (!Serial.available())
-  {
-  }
-  char serialChar = Serial.read();
-  if (serialChar == 'Y' || serialChar == 'y')
-    return 1;
-  else
-    return 0;
-}
-
-void blink()
-{
-  /* start testing code */
-  // read the state of the pushbutton value:
-  buttonState = digitalRead(buttonPin);
-
-  // check if the pushbutton is pressed. If it is, the buttonState is HIGH:
-  if (buttonState == HIGH)
-  {
-    // write to serial monitor:
-    Serial.println(F("button state is HIGH"));
-    // turn LED on:
-    digitalWrite(ledPin, HIGH);
-  }
-  else
-  {
-    // turn LED off:
-    digitalWrite(ledPin, LOW);
-  }
-  /* end testing code */
-
-  Serial.print(F("blink"));
-  // digitalWrite(ledPin, HIGH);  // turn the LED on (HIGH is the voltage level)
-  // delay(1000);                      // wait for a second
-  // digitalWrite(ledPin, LOW);   // turn the LED off by making the voltage LOW
-  // delay(1000);
-}