Merge pull request #2 from StrangeD0s/load-html-from-sd

load html from sd and implement post requests

arduino-sony-minidisc-ir-remote.ino

@@ -31,18 +31,72 @@
 
  developed for the ESP32vn IoT Uni board 2024
  */
+
+//-----------------------------------------
+// Arduino Web Server using AJAX
+// HTML code of webpage is stored on SD card
+//-----------------------------------------
+#include <Arduino.h>
+#include <WiFi.h>
+#include <AsyncTCP.h>
+#include <ESPAsyncWebServer.h>
 #include "FS.h"
 #include "SD.h"
 #include "SPI.h"
-
-#include <WiFi.h>
 #include <IRremote.hpp>
 #include "secrets.h"
 #include "defines.h"
 
-WiFiServer server(80);
+//------------------------------------------------
+
+// Create AsyncWebServer object on port 80
+AsyncWebServer server(80);
+// WiFiServer server(80);
+
+const char *PARAM_MESSAGE = "message";
+
+void notFound(AsyncWebServerRequest *request)
+{
+  request->send(404, "text/plain", "Not found");
+}
+
+//------------------------------------------------
+//-------------- SD-Card Functions ---------------
+void initSDCard()
+{
+  if (!SD.begin())
+  {
+    Serial.println("Card Mount Failed");
+    return;
+  }
+  uint8_t cardType = SD.cardType();
+
+  if (cardType == CARD_NONE)
+  {
+    Serial.println("No SD card attached");
+    return;
+  }
+  Serial.print("SD Card Type: ");
+  if (cardType == CARD_MMC)
+  {
+    Serial.println("MMC");
+  }
+  else if (cardType == CARD_SD)
+  {
+    Serial.println("SDSC");
+  }
+  else if (cardType == CARD_SDHC)
+  {
+    Serial.println("SDHC");
+  }
+  else
+  {
+    Serial.println("UNKNOWN");
+  }
+  uint64_t cardSize = SD.cardSize() / (1024 * 1024);
+  Serial.printf("SD Card Size: %lluMB\n", cardSize);
+}
 
-/**** SD-Card Functions ****/
 void listDir(fs::FS &fs, const char *dirname, uint8_t levels)
 {
   Serial.printf("Listing directory: %s\n", dirname);
@@ -82,252 +136,130 @@ void listDir(fs::FS &fs, const char *dirname, uint8_t levels)
   }
 }
 
-void readFile(fs::FS &fs, const char *path)
+//------------------------------------------------
+//--------------- IR Functions -------------------
+
+void initIR()
 {
-  Serial.printf("Reading file: %s\n", path);
+  IrSender.begin(IR_SEND_PIN, ENABLE_LED_FEEDBACK, USE_DEFAULT_FEEDBACK_LED_PIN); // Specify send pin and enable feedback LED at default feedback LED pin
-
+  Serial.println();
-  File file = fs.open(path);
+  Serial.print(F("Send IR signals at pin "));
-  if (!file)
+  Serial.println(IR_SEND_PIN);
-  {
-    Serial.println("Failed to open file for reading");
-    return;
-  }
-
-  Serial.print("Read from file: ");
-  while (file.available())
-  {
-    Serial.write(file.read());
-  }
-  file.close();
 }
 
-void testFileIO(fs::FS &fs, const char *path)
-{
-  File file = fs.open(path);
-  static uint8_t buf[512];
-  size_t len = 0;
-  uint32_t start = millis();
-  uint32_t end = start;
-  if (file)
-  {
-    len = file.size();
-    size_t flen = len;
-    start = millis();
-    while (len)
-    {
-      size_t toRead = len;
-      if (toRead > 512)
-      {
-        toRead = 512;
-      }
-      file.read(buf, toRead);
-      len -= toRead;
-    }
-    end = millis() - start;
-    Serial.printf("%u bytes read for %u ms\n", flen, end);
-    file.close();
-  }
-  else
-  {
-    Serial.println("Failed to open file for reading");
-  }
-
-  file = fs.open(path, FILE_WRITE);
-  if (!file)
-  {
-    Serial.println("Failed to open file for writing");
-    return;
-  }
-
-  size_t i;
-  start = millis();
-  for (i = 0; i < 2048; i++)
-  {
-    file.write(buf, 512);
-  }
-  end = millis() - start;
-  Serial.printf("%u bytes written for %u ms\n", 2048 * 512, end);
-  file.close();
-}
-
-/* ============ IR Functions ============ */
 void sendButton(int command)
 {
+  Serial.println("sendButton command: ");
   Serial.println(command);
   Serial.flush();
   IrSender.sendSony(0xF, command, 2, 12);
 }
 
-/* ============ Setup ============ */
+//------------------------------------------------
+//------------- Webserver Functions --------------
+
+void initWiFi()
+{
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(SSID, PASSWORD);
+  Serial.print("Connecting to WiFi ..");
+  while (WiFi.status() != WL_CONNECTED)
+  {
+    Serial.print('.');
+    delay(1000);
+  }
+  Serial.println(WiFi.localIP());
+}
+
+//------------------------------------------------
+//-------------------- Setup ---------------------
 void setup()
 {
   Serial.begin(115200);
+  initWiFi();
+  initSDCard();
 
   pinMode(LED_PIN, OUTPUT); // set the LED pin mode
 
-  delay(10);
+  initIR();
 
-  /* ============ SD-Card Setup ============ */
+  server.on("/", HTTP_GET, [](AsyncWebServerRequest *request)
-  if (!SD.begin())
+            { request->send(SD, "/index.html", "text/html"); });
-  {
-    Serial.println("Card Mount Failed");
-    return;
-  }
-  uint8_t cardType = SD.cardType();
 
-  if (cardType == CARD_NONE)
+  server.serveStatic("/", SD, "/");
-  {
-    Serial.println("No SD card attached");
-    return;
-  }
 
-  Serial.print("SD Card Type: ");
+  // Send a GET request to <IP>/api/gettextinput?message=<message>
-  if (cardType == CARD_MMC)
+  server.on("/api/gettextinput", HTTP_GET, [](AsyncWebServerRequest *request)
-  {
+            {
-    Serial.println("MMC");
+    String message;
-  }
+    if (request->hasParam("text_input"))
-  else if (cardType == CARD_SD)
+    {
-  {
+      message = request->getParam("text_input")->value();
-    Serial.println("SDSC");
+      Serial.println(message);
-  }
+    }
-  else if (cardType == CARD_SDHC)
+    else
-  {
+    {
-    Serial.println("SDHC");
+      message = "No message sent";
-  }
+    }
-  else
+    request->send(SD, "/index.html", "text/html"); });
-  {
-    Serial.println("UNKNOWN");
-  }
 
-  uint64_t cardSize = SD.cardSize() / (1024 * 1024);
+  // Send a POST request to <IP>/api/control-led with a form field message set to <message>
-  Serial.printf("SD Card Size: %lluMB\n", cardSize);
+  server.on("/api/control-led", HTTP_POST, [](AsyncWebServerRequest *request)
+            {
+        String message;
+        if (request->hasParam("led", true)) {
+            message = request->getParam("led", true)->value();
+            if (message == "1")
+              digitalWrite(LED_PIN, HIGH); 
+            if (message == "0")
+              digitalWrite(LED_PIN, LOW); 
+        } else {
+            message = "No message sent";
+        }
+        request->send(SD, "/index.html", "text/html"); });
 
-  listDir(SD, "/", 0);
+  // Send a POST request to <IP>/api/gettext with a form field message set to <message>
-  readFile(SD, "/index.html");
+  server.on("/api/gettext", HTTP_POST, [](AsyncWebServerRequest *request)
-  Serial.printf("Total space: %lluMB\n", SD.totalBytes() / (1024 * 1024));
+            {
-  Serial.printf("Used space: %lluMB\n", SD.usedBytes() / (1024 * 1024));
+        String message;
+        if (request->hasParam("text_box", true)) {
+            message = request->getParam("text_box", true)->value();
+            Serial.println(message);
+        } else {
+            message = "No message sent";
+        }
+        request->send(SD, "/index.html", "text/html"); });
 
-  /* ============ IR Setup ============ */
+  // Send a POST request to <IP>/api/control-deck with a form field message set to <message>
-  IrSender.begin(IR_SEND_PIN, ENABLE_LED_FEEDBACK, USE_DEFAULT_FEEDBACK_LED_PIN); // Specify send pin and enable feedback LED at default feedback LED pin
+  server.on("/api/control-deck", HTTP_POST, [](AsyncWebServerRequest *request)
-  Serial.println();
+            {
-  Serial.print(F("Send IR signals at pin "));
+        String message;
-  Serial.println(IR_SEND_PIN);
+        if (request->hasParam("control", true)) {
+            message = request->getParam("control", true)->value();
+            //Serial.print(message);
+            if (message == "POWER")
+              sendButton(POWER);
+            if (message == "PLAY")
+              sendButton(PLAY);
+            if (message == "PAUSE")
+              sendButton(PAUSE);
+            if (message == "STOP")
+              sendButton(STOP);
+            if (message == "PREV")
+              sendButton(PREV);
               
-  /* ============ Webserver Setup ============ */
+            if (message == "NEXT")
+              sendButton(NEXT);
+        } else {
+            message = "No message sent";
+        }
+        request->send(SD, "/index.html", "text/html"); });
 
-  // We start by connecting to a WiFi network
+  server.onNotFound(notFound);
-
-  Serial.println();
-  Serial.println();
-  Serial.print("Connecting to ");
-  Serial.println(SSID);
-
-  WiFi.begin(SSID, PASSWORD);
-
-  while (WiFi.status() != WL_CONNECTED)
-  {
-    delay(500);
-    Serial.print(".");
-  }
-
-  Serial.println();
-  Serial.println("WiFi connected.");
-  Serial.println("IP address: ");
-  Serial.println(WiFi.localIP());
 
   server.begin();
 }
 
 void loop()
 {
-  WiFiClient client = server.available(); // listen for incoming clients
-
-  if (client)
-  {                                // if you get a client,
-    Serial.println("New Client."); // print a message out the serial port
-    String currentLine = "";       // make a String to hold incoming data from the client
-    while (client.connected())
-    { // loop while the client's connected
-      if (client.available())
-      {                         // if there's bytes to read from the client,
-        char c = client.read(); // read a byte, then
-        Serial.write(c);        // print it out the serial monitor
-        if (c == '\n')
-        { // if the byte is a newline character
-
-          // if the current line is blank, you got two newline characters in a row.
-          // that's the end of the client HTTP request, so send a response:
-          if (currentLine.length() == 0)
-          {
-            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
-            // and a content-type so the client knows what's coming, then a blank line:
-            client.println("HTTP/1.1 200 OK");
-            client.println("Content-type:text/html");
-            client.println();
-
-            // the content of the HTTP response follows the header:
-            client.print("Click <a href=\"/H\">here</a> to turn the LED on pin 13 on.<br>Click <a href=\"/L\">here</a> to turn the LED on pin 13 off.<br><a href=\"/power\">power</a><br><a href=\"/play\">play</a><br><a href=\"/pause\">pause</a><br><a href=\"/stop\">stop</a><br><a href=\"/prev\">previous track</a><br><a href=\"/next\">next track</a><br>");
-            client.print("<form action=\"/api/control-deck\" method=\"post\"><button name=\"control\" type=\"submit\" value=\"play\">play</button></form><br><form action=\"/api/control-deck\" method=\"get\"><input name=\"textinput\" type=\"text\" /><button type=\"submit\">send</button></form><br>");
-
-            // The HTTP response ends with another blank line:
-            client.println();
-            // break out of the while loop:
-            break;
-          }
-          else
-          { // if you got a newline, then clear currentLine:
-            currentLine = "";
-          }
-        }
-        else if (c != '\r')
-        {                   // if you got anything else but a carriage return character,
-          currentLine += c; // add it to the end of the currentLine
-        }
-
-        // Check to see if the client request was "GET /H" or "GET /L":
-        if (currentLine.endsWith("GET /H"))
-        {
-          digitalWrite(LED_PIN, HIGH); // GET /H turns the LED on
-        }
-        if (currentLine.endsWith("GET /L"))
-        {
-          digitalWrite(LED_PIN, LOW); // GET /L turns the LED off
-        }
-        if (currentLine.endsWith("GET /power"))
-        {
-          sendButton(POWER);
-        }
-        if (currentLine.endsWith("GET /play"))
-        {
-          sendButton(PLAY);
-        }
-        if (currentLine.endsWith("GET /pause"))
-        {
-          sendButton(PAUSE);
-        }
-        if (currentLine.endsWith("GET /stop"))
-        {
-          sendButton(STOP);
-        }
-        if (currentLine.endsWith("GET /prev"))
-        {
-          sendButton(PREV);
-        }
-        if (currentLine.endsWith("GET /next"))
-        {
-          sendButton(NEXT);
-        }
-        if (currentLine.endsWith("POST /api/control-deck"))
-        {
-
-          Serial.println("POST");
-          char c = client.read();
-          Serial.print(c);
-        }
-      }
-    }
-    // close the connection:
-    client.stop();
-    Serial.println("Client Disconnected.");
-  }
 }

sd-card/Index.html

@@ -8,7 +8,6 @@
       name="viewport"
       content="width=device-width, initial-scale=1, shrink-to-fit=no"
     />
-    <!-- <link rel="stylesheet" href="style.css" /> -->
     <style>
       :root {
         --main-bg-color: #212121;
@@ -184,26 +183,26 @@
           <button
             name="control"
             type="submit"
-            value="power"
+            value="POWER"
             class="smallbutton"
           >
             power
           </button>
-          <button name="control" type="submit" value="play" class="smallbutton">
+          <button name="control" type="submit" value="PLAY" class="smallbutton">
             play
           </button>
           <button
             name="control"
             type="submit"
-            value="pause"
+            value="PAUSE"
             class="smallbutton"
           >
             pause
           </button>
-          <button name="control" type="submit" value="stop" class="smallbutton">
+          <button name="control" type="submit" value="STOP" class="smallbutton">
             stop
           </button>
-          <button name="control" type="submit" value="next" class="smallbutton">
+          <button name="control" type="submit" value="NEXT" class="smallbutton">
             next
           </button>
           <button class="roundbutton"></button>